Tapping capacities are based on use of a spiral or point tap. The capacities are based on depth of tapping limited to 1.5 times the tap diameter.
Unit of Measure

Specifications

Erickson Collet Series

N/A KTC

Chucking Capacity (inches/mm)

N/A #3 to 5/8 (M3 to M16)

Type of Tap Holding

N/A Floating #0.016 (0.4)

Applicable Synchro Tapper Model

N/A STC-P316U

A

N/A 0.60 inches (15.3 mm)

B

N/A 5.12 inches (130 mm)

C

N/A 1.57 inches (40 mm)

D

N/A 1 1/8 inches (28.6 mm)

Machining Specification

N/A Drilling Reaming Tapping

Depth

N/A Blind Through

Coolant

N/A Dry Oil Base Water Base

Working Direction of Spindle

N/A Horizontal Stand Up Stant Down Vertical Down Vertical Up

Type of Spindle

N/A ASA Collet

Type of Multi Spindle Head

N/A Catch Clip Type Fixed Spindle Type

Requested Drilling and Tapping Unit

N/A Selfeeder Synchotapper