When there is limited accessibility to the work area, the offset head is an ideal accessory to the Selfeeder. It is attached directly onto the Selfeeder in place of the standard type drilling head. If the workpiece has an obtrusion or difficult contour the offset head can get into spots normally difficult or impossible for the standard drilling head. Drilling and countersinking operations can be done easily.
The drilling capacity of the offset drill head is in accordance with the capacity of selfeeder used.
The drilling capacity of the offset drill head is in accordance with the capacity of selfeeder used.
Unit of Measure
Specifications
Operating Air Pressure (psig) |
N/A 90 |
Offset Pitch (inches) |
N/A 1.8701 |
Chuck Capacity (inches) |
N/A 5/32 to 9/16 |
Chuck Type |
N/A Erickson collet model 100 |
Speed Ratio |
N/A 1 |
Applicable Selfeeder Model |
N/A SFC-1305U SFC-1311U SFC-1325U SFC-1338U |
Weight (lbs) |
N/A 2.2 |
Machining Specification |
N/A Drilling Reaming Tapping |
Depth |
N/A Blind Through |
Coolant |
N/A Dry Oil Base Water Base |
Working Direction of Spindle |
N/A Horizontal Stand Up Stant Down Vertical Down Vertical Up |
Type of Spindle |
N/A ASA Collet |
Type of Multi Spindle Head |
N/A Catch Clip Type Fixed Spindle Type |
Requested Drilling and Tapping Unit |
N/A Selfeeder Synchotapper |