Catch-Clip equipped Drill Heads require very little change-over time, increasing productivity by minimizing machine idle time.
Unit of Measure
Specifications
P |
N/A 0.96 ∼ 1.61 inches (24.2 ∼ 41 mm) |
D |
N/A 7.56 inches (192 mm) |
L |
N/A 12.87 inches (327 mm) |
L1 |
N/A 2.56 inches (65 mm) |
L2 |
N/A 5.59 inches (142 mm) |
L3 |
N/A 4.72 inches (120 mm) |
A |
N/A 0.94 inches (24 mm) |
C |
N/A 1.81 inches (46 mm) |
E |
N/A 0.08 inches (2 mm) |
S |
N/A 2.36 inches (60 mm) |
T |
N/A 10.00 inches (254 mm) |
U |
N/A 4.57 inches (116 mm) |
Machining Specification |
N/A Drilling Reaming Tapping |
Depth |
N/A Blind Through |
Coolant |
N/A Dry Oil Base Water Base |
Working Direction of Spindle |
N/A Horizontal Stand Up Stant Down Vertical Down Vertical Up |
Type of Spindle |
N/A ASA Collet |
Type of Multi Spindle Head |
N/A Catch Clip Type Fixed Spindle Type |
Requested Drilling and Tapping Unit |
N/A Selfeeder Synchotapper |
Spindle Motor |
N/A 2-Spindle |