Request Information
R Air return regulators serve the same function as the spring return type in that they control the forward speed of the drill. However, the air type requires an air signal at the end of each drilling cycle to return the regulator to its original position. Also, these regulators are required for peck feed drilling as they are capable of holding the drilling depth at the end of each peck feed motion.
Unit of Measure

Specifications

Type of Rod Return

 N/A Air return

Type

 N/A R

Maximum Stroke

 N/A 1.18 inches (30 mm)

Load Range

 N/A 44 - 330 lbs (20 - 150 kg)

Permissible Impact Load

 N/A 1.80 (ft. lbs.) (0.25 kg.m)

A

 N/A 1.57 inches (40 mm)

B

 N/A 5.00 inches (127 mm)

C

 N/A 9.45 inches (240 mm)

Detail Chart

 N/A
Model Range of Speed Control for each thrust in./sec. Range of Speed Control for each thrust mm/sec.
 
R-2442A
R-2462A
R-2482A		 F = 44 lbs. :0.01 - 0.20
F = 220 lbs. :0.02 - 0.98
F = 330 lbs. :0.03 - 1.18		 F = 20 kg :0.3 - 5
F = 100 kg :0.5 - 25
F = 150 kg :0.8 - 30
R-3182A
R-31132A		 F = 220 lbs. :0.01 - 0.47
F = 480 lbs. :0.02 - 0.98
F = 660 lbs. :0.03 - 1.18		 F = 100 kg :0.3 - 12
F = 220 kg :0.5 - 25
F = 300 kg :0.8 - 30

Speed Adjust Range

 N/A F=310 Lbs, 0.03 to 1.00 in./sec. F=44 Lbs, 0.02 to 0.12 in./sec.

Note

 N/A
    RB-2460 used with SFB pneumatic Selfeeder requires special screw supporter.
    R-2442A, R-2462A and R-2482A used with SFB and SFC pneumatic selfeeder requires special spacer and screw supporter.

Weight

 N/A 1.3 kg2.86 lbs