Compact sized turret which uses a Selfeeder "Varimec" as a drive unit. It has a tool change function so 1 machine can do 4 types of operations. Also it is useful for using by "automatic drilling machine style with tool change system".
Unit of Measure

Specifications

Spindle Speed (no load)

N/A 1000 ~ 7000 min-1

Chuck Type

N/A Stub Holder (KH-20E NT tool)

Chucking Capacity

N/A 2.6 ~ 9.0 mm

Aluminum Max. Drilling Size (ADC)

N/A 6.5 mm

Cast Iron Max. Drilling Size (FC200)

N/A 5 mm

Steel Max. Drilling Size (S45C)

N/A 4 mm

Maximum Stroke

N/A 200 mm

Spindle Motor

N/A 0.4 kW DC Brushless Motor

Feed Motor

N/A 0.4 kW AC Servo Motor

Thrust (N)

N/A 1660

Max. Rapid Approach Speed

N/A 200 mm/sec

Max. Cutting Speed

N/A 16.7 mm/sec

Indexing Time (Sec)

N/A 0.9 sec

ATC Indexing Time

N/A 0.8 sec

Weight

N/A 73 kg

Note

N/A

  • To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed)
  • The drilling capacity shown above is for a depth equivalent to the drill diameter times two.
  • Indexing time is the time for turret rotation. It does not including the time of spindle start and stop.
  • When you install this turret head into SSV3-7100THB, please set "under 7,000min-1" for spindle rotation speed.
  • Holding brake is attached to the feed motor.
  • AL…Aluminium, FC…Cast Iron, ST…Steel.