Tapping capacities are base on use of a spiral or point lap. The capacities are based on depth of tapping limited to 1.5 times the lap diameter.
Unit of Measure
Specifications
Spindle Center Distance (min to max) |
N/A 0.56 ∼ 0.60 inches (14 ∼ 15 mm) |
Chucking Capacity (inches/mm) |
N/A #0 to #12 (M1.6 to M5) |
Type of Tap Holding |
N/A Centering |
Applicable Synchro Tapper Model |
N/A STB-L108U |
P |
N/A 0.56 ∼ 0.60 inches (14 ∼ 15 mm) |
D |
N/A 3.46 inches (88 mm) |
L |
N/A 8.98 inches (228 mm) |
L1 |
N/A 3.15 inches (80 mm) |
L2 |
N/A 5.83 inches (148 mm) |
A |
N/A 0.54 inches (13.6 mm) |
C |
N/A 0.75 inches (19 mm) |
W |
N/A 3.62 inches (92 mm) |
Machining Specification |
N/A Drilling Reaming Tapping |
Depth |
N/A Blind Through |
Coolant |
N/A Dry Oil Base Water Base |
Working Direction of Spindle |
N/A Horizontal Stand Up Stant Down Vertical Down Vertical Up |
Type of Spindle |
N/A ASA Collet |
Type of Multi Spindle Head |
N/A Catch Clip Type Fixed Spindle Type |
Requested Drilling and Tapping Unit |
N/A Selfeeder Synchotapper |
Spindle Motor |
N/A 4-Spindle |