Tapping capacities are base on use of a spiral or point lap. The capacities are based on depth of tapping limited to 1.5 times the lap diameter.
Unit of Measure
Specifications
Spindle Center Distance (min to max) |
N/A 0.91 ∼ 2.51 inches (23 ∼ 64 mm) |
Erickson Collet Series |
N/A JTC |
Chucking Capacity (inches/mm) |
N/A #3 to 5/16 (M3 to M8) |
Type of Tap Holding |
N/A Floating #0.008 (0.2) |
Applicable Synchro Tapper Model |
N/A STB-H108U STB-L108U |
Synchro Tapper Model Revolution min-1 |
N/A 260 420 620 690 |
P |
N/A 0.91 ∼ 2.51 inches (23 ∼ 64 mm) |
D |
N/A 4.88 inches (124 mm) |
L |
N/A 8.46 inches (215 mm) |
L1 |
N/A 3.66 inches (93 mm) |
L2 |
N/A 4.80 inches (122 mm) |
A |
N/A 0.87 inches (22 mm) |
B |
N/A 11/16 inches (17.5 mm) |
C |
N/A 0.58 inches (14.7 mm) |
W |
N/A 5.04 inches (128 mm) |
Machining Specification |
N/A Drilling Reaming Tapping |
Depth |
N/A Blind Through |
Coolant |
N/A Dry Oil Base Water Base |
Working Direction of Spindle |
N/A Horizontal Stand Up Stant Down Vertical Down Vertical Up |
Type of Spindle |
N/A ASA Collet |
Type of Multi Spindle Head |
N/A Catch Clip Type Fixed Spindle Type |
Requested Drilling and Tapping Unit |
N/A Selfeeder Synchotapper |
Spindle Motor |
N/A 4-Spindle |