- All multiple spindle heads have a gear ratio of 1:1.
- Tapping capacities are based on use of a spiral or point tap. The capacities are based on depth of tapping limited to 1.5 times the tap diameter.
Unit of Measure
Specifications
Offset Pitch |
N/A 2.7165 inches (69 mm) |
Erickson Collet Series |
N/A LTC |
Chucking Capacity (inches/mm) |
N/A 1/2 to 7/8 (M12 to M22) |
Type of Tap Holding |
N/A Floating #0.016 (0.4) |
Applicable Synchro Tapper Model |
N/A STC-P316U |
Machining Specification |
N/A Drilling Reaming Tapping |
Depth |
N/A Blind Through |
Coolant |
N/A Dry Oil Base Water Base |
Working Direction of Spindle |
N/A Horizontal Stand Up Stant Down Vertical Down Vertical Up |
Type of Spindle |
N/A ASA Collet |
Type of Multi Spindle Head |
N/A Catch Clip Type Fixed Spindle Type |
Requested Drilling and Tapping Unit |
N/A Selfeeder Synchotapper |