When there is limited accessibility to the work area, the offset head is an ideal accessory to the Selfeeder. It is attached directly onto the Selfeeder in place of the standard type drilling head. If the workpiece has an obtrusion or difficult contour the offset head can get into spots normally difficult or impossible for the standard drilling head. Drilling and countersinking operations can be done easily.
The drilling capacity of the offset drill head is in accordance with the capacity of selfeeder used.
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1 

Model #

Operating Air Pressure (psig)

Offset Pitch (inches)

Chuck Capacity (inches)

Chuck Type

Weight (lbs)

Sort by
N/A 90 N/A 1.8701 N/A 1/32 to 1/2 N/A Drill Chuck N/A 2.2
N/A 90 N/A 1.5354 N/A 1/32 to 1/4 N/A Drill Chuck N/A 1.6
N/A 90 N/A 1.5354 N/A 3/64 to 25/64 N/A Erickson collet model 200 N/A 1.6
N/A 90 N/A 1.8701 N/A 5/32 to 9/16 N/A Erickson collet model 100 N/A 2.2
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1