A Single Source for Multiple Manufacturing Applications
All Categories > Automated Drilling & Tapping Equipment > Multi-Spindle Drilling and Tapping Heads > Tapper Heads > Tapper Heads Collet Chuck Style (Adjustable Spindle) > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Tapper Heads Collet Chuck Style (Adjustable Spindle)

Check up to five results to perform an action.


  • All multiple spindle heads above have a gear ratio of 1:1
  • Tapping capacities are base on use of a spiral or point tap. The capacities are based on depth of tapping limited to 1.5 times the tap diameter.



   
  Results 1 - 3 of 3 Unit of Measure: Imperial Metric Both 1 

Model #

Spindle Center Distance (min to max)

Erickson Collet Series

Chucking Capacity (inches/mm)

Type of Tap Holding

Applicable Synchro Tapper Model

2TC-E1040ACU 0.91 ∼ 3.58 inches (23 ∼ 91 mm) JTC #0 to #8 (M1.6 to M4) Centering STB-H108U
STB-L108U
2TC-E308OAFU 0.91 ∼ 3.58 inches (23 ∼ 91 mm) JTC #3 to 5/16 (M3 to M8) Floating #0.008 (0.2) STB-H108U
STB-L108U
2TD-60120AFU 1.91 ∼ 6.57 inches (48.5 ∼ 167 mm) KTC 1/4 to 1/2 (M6 to M12) Floating #0.016 (0.4) STC-P316U
  Results 1 - 3 of 3 1