Tapper Heads
tapper-heads-2
Tapper Heads Collet Chuck Style (Adjustable Spindle)
(3)- All multiple spindle heads above have a gear ratio of 1:1
- Tapping capacities are base on use of a spiral or point tap. The capacities are based on depth of tapping limited to 1.5 times the tap diameter.
Tapper Heads Collet Chuck Style (Fixed Spindle)
(28) Tapping capacities are base on use of a spiral or point lap. The capacities are based on depth of tapping limited to 1.5 times the lap diameter. 2TC-E1040TBFUE.JPGTapper Heads Collet Chuck Style (Quick Change "Catch-Clip")
(18) Catch-Clip equipped Tapper Heads require very little change-over time, increasing productivity by minimizing machine idle time. a0001213.JPGTapper Heads ASA Quick-Change "Catch-Clip"
(10) Catch-Clip equipped Tapper Heads are available with ASA Quick-Change adapters a0001221.JPGTapper Heads Collet Chuck Style (Offset Fixed)
(3)- All multiple spindle heads have a gear ratio of 1:1.
- Tapping capacities are based on use of a spiral or point tap. The capacities are based on depth of tapping limited to 1.5 times the tap diameter.