When there is limited accessibility to the work area, the offset head is an ideal accessory to the Selfeeder. It is attached directly onto the Selfeeder in place of the standard type drilling head. If the workpiece has an obtrusion or difficult contour the offset head can get into spots normally difficult or impossible for the standard drilling head. Drilling and countersinking operations can be done easily.
The drilling capacity of the offset drill head is in accordance with the capacity of selfeeder used.
Unit of Measure
Items
Product Image - Offset Drill Head

Offset Drill Heads

Product Image - Offset Drill Head

Offset Drill Heads

Product Image - Offset Drill Head

Offset Drill Heads

Product Image - Offset Drill Head

Offset Drill Heads
Operating Air Pressure (psig) N/A 90
Offset Pitch (inches) N/A 1.5354 N/A 1.5354 N/A 1.8701 N/A 1.8701
Chuck Capacity (inches) N/A 3/64 to 25/64 N/A 1/32 to 1/4 N/A 5/32 to 9/16 N/A 1/32 to 1/2
Chuck Type N/A Erickson collet model 200 N/A Drill Chuck N/A Erickson collet model 100 N/A Drill Chuck
Speed Ratio N/A 1
Applicable Selfeeder Model N/A SFB-6005 SFB-6016 SFB-6028 SFB-6080 N/A SFB-6005 SFB-6016 SFB-6028 SFB-6080 N/A SFC-1305U SFC-1311U SFC-1325U SFC-1338U N/A SFC-1305U SFC-1311U SFC-1325U SFC-1338U
Weight (lbs) N/A 1.6 N/A 1.6 N/A 2.2 N/A 2.2
Machining Specification N/A Drilling Reaming Tapping
Workpiece Material N/A
Hole Dia./Tap Size(s) N/A
Material Hardness N/A
Depth N/A Blind Through
Coolant N/A Dry Oil Base Water Base
Working Direction of Spindle N/A Horizontal Stand Up Stant Down Vertical Down Vertical Up
Type of Spindle N/A ASA Collet
Type of Multi Spindle Head N/A Catch Clip Type Fixed Spindle Type
Requested Drilling and Tapping Unit N/A Selfeeder Synchotapper
Cycle Time Required (From machine start to stop) N/A
Special Request N/A