Catch-Clip equipped Tapper Heads require very little change-over time, increasing productivity by minimizing machine idle time.
Unit of Measure
Items
Product Image - 2-Spindle Collet Chuck (Quick Change "Catch-Clip")

Tapper Heads Collet Chuck Style (Quick Change "Catch-Clip")

Product Image - 2-Spindle Collet Chuck (Quick Change "Catch-Clip")

Tapper Heads Collet Chuck Style (Quick Change "Catch-Clip")

Product Image - 2-Spindle Collet Chuck (Quick Change "Catch-Clip")

Tapper Heads Collet Chuck Style (Quick Change "Catch-Clip")

Product Image - 2-Spindle Collet Chuck (Quick Change "Catch-Clip")

Tapper Heads Collet Chuck Style (Quick Change "Catch-Clip")

Product Image - 2-Spindle Collet Chuck (Quick Change "Catch-Clip")

Tapper Heads Collet Chuck Style (Quick Change "Catch-Clip")
P N/A 0.48 ∼ 0.56 inches (12 ∼ 14 mm) N/A 0.56 ∼ 0.60 inches (14 ∼ 15 mm) N/A 0.60 ∼ 3.58 inches (15 ∼ 91 mm) N/A 0.91 ∼ 3.58 inches (23 ∼ 91 mm) N/A 0.91 ∼ 5.11 inches (23 ∼ 130 mm)
D N/A 5.28 inches (134 mm) N/A 5.28 inches (134 mm) N/A 5.28 inches (134 mm) N/A 5.28 inches (134 mm) N/A 7.56 inches (192 mm)
L N/A 9.45 inches (240 mm) N/A 9.33 inches (237 mm) N/A 8.94 inches (227 mm) N/A 9.84 inches (250 mm) N/A 11.49 inches (292 mm)
L1 N/A 3.27 inches (83 mm) N/A 3.15 inches (80 mm) N/A 2.76 inches (70 mm) N/A 3.66 inches (93 mm) N/A 3.66 inches (93 mm)
L2 N/A 6.18 inches (157 mm) N/A 6.18 inches (157 mm) N/A 6.18 inches (157 mm) N/A 6.18 inches (157 mm) N/A 7.83 inches (199 mm)
A N/A 0.46 inches (11.8 mm) N/A 0.54 inches (13.6 mm) N/A 0.58 inches (14.7 mm) N/A 0.87 inches (22 mm) N/A 0.87 inches (22 mm)
B N/A N/A N/A 1/2 inches (12.7 mm) N/A 11/16 inches (17.5 mm) N/A 11/16 inches (17.5 mm)
C N/A 0.75 inches (19 mm) N/A 0.75 inches (19 mm) N/A 0.50 inches (12.7 mm) N/A 0.58 inches (14.7 mm) N/A 0.58 inches (14.7 mm)
S N/A 1.97 inches (50 mm) N/A 1.97 inches (50 mm) N/A 1.97 inches (50 mm) N/A 1.97 inches (50 mm) N/A 2.56 inches (65 mm)
T N/A 6.85 inches (174 mm) N/A 6.85 inches (174 mm) N/A 6.85 inches (174 mm) N/A 6.85 inches (174 mm) N/A 10.00 inches (254 mm)
U N/A 3.58 inches (91 mm) N/A 3.58 inches (91 mm) N/A 3.58 inches (91 mm) N/A 3.58 inches (91 mm) N/A 4.57 inches (116 mm)
Machining Specification N/A Drilling Reaming Tapping
Workpiece Material N/A
Hole Dia./Tap Size(s) N/A
Material Hardness N/A
Depth N/A Blind Through
Coolant N/A Dry Oil Base Water Base
Working Direction of Spindle N/A Horizontal Stand Up Stant Down Vertical Down Vertical Up
Type of Spindle N/A ASA Collet
Type of Multi Spindle Head N/A Catch Clip Type Fixed Spindle Type
Requested Drilling and Tapping Unit N/A Selfeeder Synchotapper
Cycle Time Required (From machine start to stop) N/A
Special Request N/A
Spindle Motor N/A 2-Spindle