| Items |
 SB800 Superoll SB Series |
SB850 Superoll SB Series |
SB900 Superoll SB Series |
SB950 Superoll SB Series |
SB1000 Superoll SB Series |
|||||
| Type | Standard Type | |||||||||
| Hole Type | Blind Hole | |||||||||
| Diameter - A (Adjustment) | 0.313 ∼ 0.336 inches (7.95 ∼ 8.55 mm) | 0.333 ∼ 0.356 inches (8.45 ∼ 9.05 mm) | 0.353 ∼ 0.375 inches (8.95 ∼ 9.55 mm) | 0.373 ∼ 0.395 inches (9.45 ∼ 10.05 mm) | 0.392 ∼ 0.415 inches (9.95 ∼ 10.55 mm) | |||||
| Maximum Processing Depth (H) | 1.968 inches (50 mm) | |||||||||
| Tool Length (L) - Straight | 4.528 inches (115 mm) | |||||||||
| Tool Length (L) - Morse Taper | 4.646 inches (118 mm) | |||||||||
| Tool Length (L) | ||||||||||
| Housing No. | HA1 | |||||||||
| Housing Diameter (D) | 1.102 inches (28 mm) | |||||||||
| Roller Part No. | B006 | B006 | B007 | B007 | B007 | |||||
| No. of Roller | 4 | |||||||||
| Stem Part No. | ||||||||||
| Mandrel Part No. | M007 | M008 | M007 | M008 | M009 | |||||
| Shank Part No. (Straight) | S01R (0.492 inches Dia. x 1.378 inches) S01R050 (1/2 inches Dia. x 1.378 inches) | |||||||||
| Shank Part No. (Morse Taper) | S01 (Morse Taper No.1) | |||||||||
|
|
||||||||||
