Print Back
  • Programmable feeds with fixed RPM
  • Up to 7.5 spindle HP
  • Optional BT30 and ER50 spindles are available
Unit of Measure

Specifications

Type

N/A Servo Driven Mechanical Feed

Chuck Type

N/A ER32

Chucking Capacity

N/A 3/64 ~ 25/32 in1.5 ~ 20 mm

Aluminum Drill Size (ADC)

N/A 43/64 in17 mm

Cast Iron Drill Size (FC200)

N/A 9/32 in7 mm

Carbon Steel Drill Size (S45C)

N/A 15/64 6 mm

Maximum Stroke

N/A 200 mm7.87 in

Spindle Motor

N/A 3.7 kW 4P Induction motor 4.96HP

Feed Motor

N/A 2.7 kW AC Servo motor 3.62HP

Thrust

N/A 1754 lbs78000 N

Maximum Rapid Approach Speed

N/A 298 mm/sec

Max. Cutting Speed

N/A 16.7 mm/sec

Weight

N/A 595 lbs270 kg

Note

N/A

1. To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed)
2. The drilling capacity shown above is for a depth equivalent to the drill diameter times two.
3. The power voltage of the feed controller and main spindle motor is a 3-phase 200V AC±10%, 50/60Hz.
4. In the case of a servo motor with a holding brake (optional), add “B” to the end of the model number.
5. AL…Aluminium, FC…Cast Iron, ST…Steel

Spindle Speed (No Load)

N/A 1800