Print Back
  • Compact high power unit
  • Spindle speeds up to 20,000 RPM
  • Fully programmable feeds and speeds
  • Robot mountable
Unit of Measure

Specifications

Type

N/A Servo Driven Mechanical Feed

Chuck Type

N/A ER16

Chucking Capacity

N/A 1/64 ~ 25/64 in0.5 ~ 10.0 mm

Aluminum Drill Size (ADC)

N/A 11/32 in8.5 mm

Cast Iron Drill Size (FC200)

N/A 19/64 in7.5 mm

Carbon Steel Drill Size (S45C)

N/A 1/4 6.5 mm

Maximum Stroke

N/A 80 mm3.15 in

Spindle Motor

N/A 0.9 kW (15000 min-1)/hr.) DC Brushless Motor 1.2hp

Feed Motor

N/A 0.4 kW AC Servo Motor 0.54hp

Thrust

N/A 270 lbs1200 N

Maximum Rapid Approach Speed

N/A 200 mm/sec

Max. Cutting Speed

N/A 16.7 mm/sec

Weight

N/A 33 lbs15 kg

Note

N/A

1. To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed)
2. The drilling capacity shown above is for a depth equivalent to the drill diameter times two.
3. The power voltage of the main spindle inverter is a 3-phase 200V AC±10%, 50/60Hz. (Feeding axis controller is single-phase.)
4. In the case of a servo motor with a holding brake (optional), add “B” to the end of the model number.
5. AL…Aluminium, FC…Cast Iron, ST…Steel

Spindle Speed (No Load)

N/A 390 ~ 3900