These Drill Heads are used with ASA "Quick-Change" adapters. Pre-set tooling is required for specific applications.
Unit of Measure
Specifications
ASA Spindle Size |
N/A 3/4-12 |
P |
N/A 3.23 ∼ 4.65 inches (82 ∼ 118 mm) |
D |
N/A 7.40 inches (188 mm) |
L |
N/A 12.37 inches (314 mm) |
L1 |
N/A 3.94 inches (100 mm) |
L2 |
N/A 6.42 inches (163 mm) |
L3 |
N/A 2.01 inches (51 mm) |
A |
N/A 1.233 - 1.235 inches (31.369 mm) |
A Tolerance (mm) |
N/A -0.050 |
B |
N/A 0.7500 - 0.7505 inches (19.050 mm) |
B Tolerance (mm) |
N/A +0.012 |
F |
N/A 0.8299 - 0.8399 inches (21.100 mm) |
F Tolerance (mm) |
N/A +0.2 |
E |
N/A 0.08 inches (2 mm) |
G |
N/A 6.93 inches (176 mm) |
W |
N/A 7.64 inches (194 mm) |
Machining Specification |
N/A Drilling Reaming Tapping |
Depth |
N/A Blind Through |
Coolant |
N/A Dry Oil Base Water Base |
Working Direction of Spindle |
N/A Horizontal Stand Up Stant Down Vertical Down Vertical Up |
Type of Spindle |
N/A ASA Collet |
Type of Multi Spindle Head |
N/A Catch Clip Type Fixed Spindle Type |
Requested Drilling and Tapping Unit |
N/A Selfeeder Synchotapper |
Spindle Motor |
N/A 3-Spindle |