Drill heads which avoid interference with drill units jig fixtures or work pieces.
All multiple spindle heads have a gear ratio of 1:1.
All multiple spindle heads have a gear ratio of 1:1.
Unit of Measure
Specifications
Offset Pitch |
N/A 3.0709 inches (78 mm) |
Chucking Capacity |
N/A 5/64 ∼ 1/2 inches (2 ∼ 12.7 mm) |
Chuck Type |
N/A Drill Chuck |
P |
N/A 3.0709 inches (78 mm) |
D |
N/A 6.85 inches (174 mm) |
L |
N/A 11.07 inches (281 mm) |
L1 |
N/A 4.29 inches (109 mm) |
L2 |
N/A 5.24 inches (133 mm) |
L3 |
N/A 1.54 inches (39 mm) |
A |
N/A 1.77 inches (45 mm) |
C |
N/A 1.57 inches (40 mm) |
E |
N/A 0.08 inches (2 mm) |
H |
N/A 0.98 inches (25 mm) |
J |
N/A 1.18 inches (30 mm) |
K |
N/A 2.60 inches (66 mm) |
M |
N/A 1.26 inches (32 mm) |
Q |
N/A 2.60 inches (66 mm) |
R |
N/A 2.52 inches (64 mm) |
Machining Specification |
N/A Drilling Reaming Tapping |
Depth |
N/A Blind Through |
Coolant |
N/A Dry Oil Base Water Base |
Working Direction of Spindle |
N/A Horizontal Stand Up Stant Down Vertical Down Vertical Up |
Type of Spindle |
N/A ASA Collet |
Type of Multi Spindle Head |
N/A Catch Clip Type Fixed Spindle Type |
Requested Drilling and Tapping Unit |
N/A Selfeeder Synchotapper |