Request Information
Spring loaded regulators are used primarily for standard drilling operations and are designed to automatically return to their position at the end of every drilling cycle.
With the RB spring return regulator, the piston rod is automatically returned to its original position by the built-in spring when the piston rod is no longer loaded.
Unit of Measure

Specifications

Type of Rod Return

 N/A Spring return

Type

 N/A RB

Maximum Stroke

 N/A 1.18 inches (30 mm)

Load Range

 N/A 44 - 330 lbs (20 - 150 kg)

Permissible Impact Load

 N/A 1.80 (ft. lbs.) (0.25 kg.m)

A

 N/A 4.53 inches (115 mm)

B

 N/A 1.10 inches (28 mm)

C

 N/A 0.94 inches (24 mm)

D

 N/A 0.35 inches (9 mm)

E

 N/A 0.79 inches (20 mm)

F

 N/A 1.26 inches (32 mm)

G

 N/A 1.18 inches (30 mm)

H

 N/A 7.87 inches (200 mm)

I

 N/A 1.34 inches (34 mm)

J

 N/A 1.73 inches (44 mm)

K

 N/A 0.20 inches (5 mm)

L

 N/A 0.59 inches (15 mm)

M

 N/A 1.18 inches (30 mm)

N

 N/A M5 x 0.8

Speed Adjust Range

 N/A F=44 Lbs, 0.02 to 0.12 in./sec. F=310 Lbs, 0.03 to 1.00 in./sec.

Applicable Selfeeder Model

 N/A ES2 ES3C ES3P GSA GSB SFB SFC

Weight

 N/A .41 kg0.90 lbs

Detail Chart

N/A

Model Range of Speed Control for each thrust in./sec. Range of Speed Control for each thrust mm/sec.
RB-2340 F = 44 lbs. :0.01 - 0.20
F = 110 lbs. :0.01 - 1.00
F = 220 lbs. :0.02 - 1.57
F = 330 lbs. :0.02 - 2.00		 F = 20kg :0.1 - 5
F = 50kg :0.2 - 25
F = 100kg :0.3 - 40
F = 150kg :0.4 - 50
RB-2460
RB-3140 F = 110 lbs. :0.01 - 40
F = 330 lbs. :0.01 - 1.00
F = 480 lbs. :0.02 - 1.38
F = 660 lbs. :0.02 - 1.57		 F = 50kg :0.1 - 10
F = 150kg :0.2 - 25
F = 220kg :0.3 - 35
F = 300kg :0.5 - 40
RB3160
RB3860 F = 480 lbs. :0.01 - 0.59
F = 840 lbs. :0.01 - 0.98
F = 990 lbs. :0.02 - 1.18		 F = 220kg :0.2 - 15
F = 380kg :0.3 - 25
F = 450kg :0.4 - 30

Features

N/A

  • The regulator is completely sealed to eliminate the need for resupplying the unit with operating oil and will provide stable speed control for many years of production.
  • Installation is easy. No need for piping or wiring.

Note

N/A

    RB-2460 used with SFB pneumatic Selfeeder requires special screw supporter.
    R-2442A, R-2462A and R-2482A used with SFB and SFC pneumatic selfeeder requires special spacer and screw supporter.