- Sugino recommends the use of proximity sensor Operating Signal Kits (OSK) to control Electric Selfeeder working positions and to provide the signals necessary for sequencing them with other operations and equipment in semi-automated or fully automated environments. These OSK's mount easily to the Selfeeder and have a cable-to-sensor quick connect feature for ease of placement.
Proximity sensors are entirely solid state electronic controls which provide rapid response and high switching rates. They contain no moving parts, require no physical contact for actuation, and have no cams or linkage. They are completely encapsulated, making them impervious to most liquids, chemicals, cutting oils and coolants, high temperature variations, and vibrations.
Order a single sensor OSK to detect home position (return position) only, or a two sensor kit to detect both home and maximum drill depth positions.
Operating Signal Kits
Unit of Measure
Specifications
Applicable Unit |
N/A
ES5 ES4P SSE5 SSE4 |
Signal |
N/A Electrical signal |
Detection |
N/A Home position |
Sensing Distance |
N/A 0.059 inches (1.5 mm) |
Operating Voltage (VDC) |
N/A 10 - 30 |
Cable Length |
N/A 16.4 inches (5 m) |
No. of Wire |
N/A 3 |
No. of LED |
N/A 2 |
Sensor Type |
N/A NPN PNP |
Stroke Range |
N/A 100 |
Selfeeder Type |
N/A Electric |
Function |
N/A micro-switch for return position signal only |
Sensor/Switch |
N/A Proximity Sensor |
