The Varimec SSV4 drill unit has a 9.84" stroke length and with it's very rigid design, it is ideally suited for a wide-range of holemaking applications in a wide variety of materials including titanium, exotic and high-nickel alloys as well as aluminum, plastics and composite materials.
Unit of Measure

Specifications

Spindle Speed (no load)

N/A 1000 ∼ 7000

Chuck Type

N/A Collect Chuck (REGO-FIX type ER-32)

Chucking Capacity

N/A 0.79 ∼ 0.787 in2.0 ∼ 20.0 mm

Aluminum Drill Size (ADC)

N/A 0.79 ∼ 0.354 in2 ∼ 9 mm

Cast Iron Drill Size (FC200)

N/A 0.79 ∼ 0.315 in2 ∼ 8 mm

Carbon Steel Drill Size (S45C)

N/A 0.79 ∼ 0.276 inches (2 ∼ 7 mm)

Maximum Stroke

N/A 9.84 inches (250 mm)

Spindle Motor

N/A 1.33 Hp (1 kW)Built-in motor

Feed Motor

N/A 1.6 Hp (1.2 kW) AC servo motor

Thrust

N/A 1034

Thrust (N)

N/A 4600

Max. Rapid Approach Speed

N/A 8.66 inches/sec (230 mm/sec)

Max. Cutting Speed

N/A 0.66 inches/sec (16.7 mm/sec)

Weight

N/A 80 kg176 lbs

Features

N/A

  • Greater Versatility
    The Varimec controller stores up to 99 individual programs. 13 preprogrammed drill modes simplify set-up and production to handle virtually all holemaking operations. The rigidity of the Varimec provides the user with the ability to perform end-milling and face-machining operations. They can be equipped with multi-spindle and off-set drill heads. And Varimec units can be integrated into any manufacturing operation, cell, system or dedicated machine.
  • High Rigidity and High Accuracy
    Linear slides guide the quill while other proprietary features serve to increase Varimec's rigidity and eliminate side load chattering, Spindle runout is under 0.0004" TIR. Depth repeatability is ±0.0008".
  • Compact Size
    Proprietary features including an internal linear slide, a spindle motor installed in the quill, a robust ball screw and guide bar have reduced the overall size of the Varimec Selfeeder to meet requirements for a very small footprint.

Note

N/A

  • The drilling capacity shown is for a depth equivalent to the drill diameter two times.
  • The power voltage is a 3-phase 200V AC+/-10% 50/60Hz.
  • In case of servo motor with a holding brake (optional), add "B" to the end of the model number.