High-precision and high-rigidity unit which uses united structure of spindle unit and slide table. It offers high-efficient deep hole drilling because of 300mm long stroke and coolant center-through system.
Unit of Measure

Specifications

Spindle Speed (no load) 50Hz

N/A 1100 min-1

Spindle Speed (no load) 60Hz

N/A 1300 min-1

Chuck Type

N/A ER40

Chucking Capacity

N/A Max.26 mm

Aluminum Max. Drilling Size (ADC)

N/A 16 mm

Cast Iron Max. Drilling Size (FC200)

N/A 9 mm

Steel Max. Drilling Size (S45C)

N/A 8 mm

Maximum Stroke

N/A 300 mm

Spindle Motor

N/A 1.5 kW Induction motor

Feed Motor

N/A 2.7 kW AC Servo motor

Thrust (N)

N/A 5000

Max. Rapid Approach Speed

N/A 300 mm/sec

Max. Cutting Speed

N/A 16.7 mm/sec

Weight

N/A 230 kg

Note

N/A

  • To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed)
  • The drilling capacity shown above is for a depth equivalent to the drill diameter times two.
  • The power voltage of the feed controller and main spindle inverter is a 3-phase 200V AC±10%, 50/60Hz.
  • Holding brake is attached to the feed motor. 5. Coolant center-through is used for SSM5 as standard specification. Please direct if you do not need it.
  • AL…Aluminium, FC…Cast Iron, ST…Steel