Catch-Clip equipped Tapper Heads require very little change-over time, increasing productivity by minimizing machine idle time.
Unit of Measure
Specifications
P |
N/A 0.60 ∼ 3.07 inches (15 ∼ 78 mm) |
D |
N/A 5.28 inches (134 mm) |
L |
N/A 8.94 inches (227 mm) |
L1 |
N/A 2.76 inches (70 mm) |
L2 |
N/A 6.18 inches (157 mm) |
A |
N/A 0.58 inches (14.7 mm) |
B |
N/A 1/2 inches (12.7 mm) |
C |
N/A 0.50 inches (12.7 mm) |
S |
N/A 1.97 inches (50 mm) |
T |
N/A 6.85 inches (174 mm) |
U |
N/A 3.58 inches (91 mm) |
Machining Specification |
N/A Drilling Reaming Tapping |
Depth |
N/A Blind Through |
Coolant |
N/A Dry Oil Base Water Base |
Working Direction of Spindle |
N/A Horizontal Stand Up Stant Down Vertical Down Vertical Up |
Type of Spindle |
N/A ASA Collet |
Type of Multi Spindle Head |
N/A Catch Clip Type Fixed Spindle Type |
Requested Drilling and Tapping Unit |
N/A Selfeeder Synchotapper |
Spindle Motor |
N/A 3-Spindle |