Tapping capacities are based on use of a spiral or point tap. The capacities are based on depth of tapping limited to 1.5 times the tap diameter.
Unit of Measure
Specifications
A |
N/A 0.60 inches (15.3 mm) |
B |
N/A 4.78 inches (121.5 mm) |
C |
N/A 1.30 inches (33 mm) |
D |
N/A 1 1/8 inches (28.6 mm) |
Machining Specification |
N/A Drilling Reaming Tapping |
Depth |
N/A Blind Through |
Coolant |
N/A Dry Oil Base Water Base |
Working Direction of Spindle |
N/A Horizontal Stand Up Stant Down Vertical Down Vertical Up |
Type of Spindle |
N/A ASA Collet |
Type of Multi Spindle Head |
N/A Catch Clip Type Fixed Spindle Type |
Requested Drilling and Tapping Unit |
N/A Selfeeder Synchotapper |