Provides "mirror" surface finishing on flat milled surfaces. This process is suited for mating and sealing surfaces as there is no limitation on surface width.
| Items |
SFP20-S20 Superoll Level |
SFP40-S25 Superoll Level |
SFP60-S32 Superoll Level |
|||
| Effective Diameter - D | 0.787 inches (20 mm) | 1.574 inches (40 mm) | 2.362 inches (60 mm) | |||
| Tool Outer Diameter - D | 2 inches (42 mm) | 2.363 inches (60 mm) | 3 inches (82 mm) | |||
| Shank Length - F | 2.362 inches (60 mm) | 3.150 inches (80 mm) | 3.150 inches (80 mm) | |||
| Shank Diameter - E | 0.787 inches (20 mm) | 0.984 inches (25 mm) | 1.260 inches (32 mm) | |||
| Overall Length - L | 3.346 inches (85 mm) | 4.528 inches (115 mm) | 4.725 inches (120 mm) | |||
| Rollers Quantity | 4 | 8 | 12 | |||
| Rotation min-1 | 900 ∼ 3000 | 500 ∼ 1600 | 300 ∼ 1000 | |||
| Feed | 0.004 ∼ 0.019 inch/rev (0.1 ∼ 0.5 mm/rev) | 0.008 ∼ 0.027 inch/rev (0.2 ∼ 0.7 mm/rev) | 0.012 ∼ 0.055 inch/rev (0.3 ∼ 1.4 mm/rev) | |||
| Pressing Depth | 0.0008 ∼ 0.0015 inches (0.02 ∼ 0.04 mm) | 0.0008 ∼ 0.0019 inches (0.02 ∼ 0.05 mm) | 0.0008 ∼ 0.0019 inches (0.02 ∼ 0.05 mm) | |||
|
|
||||||
