| Items |
 SH450 Superoll SH Series |
SH475 Superoll SH Series |
SH500 Superoll SH Series |
SH525 Superoll SH Series |
SH550 Superoll SH Series |
|||||
| Type | Standard Type | |||||||||
| Hole Type | Through Hole | |||||||||
| Diameter - A (Adjustment) | 0.176 ∼ 0.188 inches (4.45 ∼ 4.80 mm) | 0.186 ∼ 0.198 inches (4.70 ∼ 5.05 mm) | 0.195 ∼ 0.208 inches (4.95 ∼ 5.30 mm) | 0.205 ∼ 0.218 inches (5.20 ∼ 5.55 mm) | 0.215 ∼ 0.228 inches (5.45 ∼ 5.80 mm) | |||||
| Maximum Processing Depth (H) | 1.968 inches (50 mm) | |||||||||
| Tool Length (L) - Straight | 4.528 inches (115 mm) | |||||||||
| Tool Length (L) - Morse Taper | 4.646 inches (118 mm) | |||||||||
| Tool Length (L) | ||||||||||
| Housing No. | HA1 | |||||||||
| Housing Diameter (D) | 1.102 inches (28 mm) | |||||||||
| Roller Part No. | R001 | R001 | R002 | R002 | R003 | |||||
| No. of Roller | 4 | |||||||||
| Mandrel Part No. | M001 | M002 | M002 | M003 | M002 | |||||
| Stem Part No. | ||||||||||
| Shank Part No. (Straight) | S01R (0.492 inches Dia. x 1.378 inches) S01R050 (1/2 inches Dia. x 1.378 inches) | |||||||||
| Shank Part No. (Morse Taper) | S01 (Morse Taper No.1) | |||||||||
|
|
||||||||||
