Sugino Corp.
Sugino Corp.
1380 Hamilton Pkwy. Itasca, IL 60143
Toll Free: 888.SUGINO1/888.784.4661
Phone: 630.250.8585
Fax: 630.250.8665
Email: mach@suginocorp.com
Print Back
Single Roller Superoll Is outstanding In Its lightness and compactness.
The mirror-surface finishing can be obtained on inner and outer end surfaces with only one tool.
Unit of Measure

Specifications

Shank Size (in)

 N/A Ø0.984 x 3.940

Maximum Processing Length (in)

 N/A 3.940

Work Piece Inner Diameter

 N/A Ø1.420" or more

Work Piece Outer Diameter

 N/A Unlimited

Work Piece Material

 N/A Aluminum Carbon Steel Cast Iron Light Alloy Stainless

Peripheral Velocity / Feed / Load

N/A

Work piece
material		 Peripheral velocity Feed Load
ft/min in/rev lbs
Carbon steel 165~325 .001~.020 121~315
Stainless steel
Cast iron
Aluminum/Light alloy 325~650 .001~.012 22~90

Processing Conditions

N/A How to Use

  1. Attach the Single Roller Superoll to the turret of driving device such as NC lathe.
  2. Set spring load In the tool by preload adjusting knob.
  3. Rotate the work piece, and feed the tool with correct roller compression.

Note

N/A The above unprocessable length is values when the clearance between tool and processing end surface is .020 in.