A Single Source for Multiple Manufacturing Applications
All Categories > Automated Drilling & Tapping Equipment > Selfeeder Component Drilling Units > Air/Electric Type to 1.5 HP (5.5 kW) - Electric Series > ES3C-LU Selfeeder > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

ES3C-LU Selfeeder

 
Check up to five results to perform an action.


  • 1/4 HP in-line spindle motor for clearance driven applications
  • 650-3600 fixed rpm spindle speed range
  • Typical drilling capacity in mild steel is 5/16 in.(8 mm)
  • Typical drilling capacity in cast iron 11/32 in. (8.5 mm)
  • Typical drilling capacity in aluminum 7/16 in.(11 mm)
  • Standard stroke of 3.15 in. (80 mm)
  • Standard JT33 and JT1 type spindles for drill or collet chucks with integral collet, ASA and KH quick change, and special spindles available as options


   
  Results 1 - 5 of 5 Unit of Measure: Imperial Metric Both 1 

Model #

Spindle RPM (no load)

Aluminum Drill Size

Cast Iron Drill Size

Mild Steel Drill Size

Theoretical Spindle Torque

Thrust
ES3C-2-6030LU 3600 13/64 in
5 mm 		3/32 in
2.5 mm 		5/64 in
2 mm 		0.36 ft.lbs
0.49 N·m 		119 kg
264 lbs
ES3C-2-6022LU 2600 15/64 in
6 mm 		11/64 in
4.5 mm 		5/32 in
4 mm 		0.51 ft.lbs
0.69 N·m 		119 kg
264 lbs
ES3C-2-1314LU 1700 19/64 in
7.5 mm 		15/64 in
6 mm 		13/64 in
5 mm 		0.77 ft.lbs
1.04 N·m 		119 kg
264 lbs
ES3C-2-1309LU 1100 5/16 in
8 mm 		9/32 in
7 mm 		15/64 in
6 mm 		1.19 ft.lbs
1.61 N·m 		119 kg
264 lbs
ES3C-2-1305LU 650 7/16 in
11 mm 		11/32 in
8.5 mm 		5/16 in
8 mm 		2.02 ft.lbs
2.74 N·m 		119 kg
264 lbs
  Results 1 - 5 of 5 1