• Models with (LU) are for the long stroke units
  • 1 to 1.5 HP spindle motors
  • 250-7,300 fixed rpm spindle speed range
  • Typical drilling capacity in mild steel is 15/32 in. (12mm)
  • Typical drilling capacity in cast iron 17/64 in. (13.5mm)
  • Typical drilling capacity in aluminum 5/8 in. (16mm)
  • Compact, yet long stroke available with 3.94” (100mm) and 7.87” (200mm)
  • Double the torque of comparable size units
  • Standard JT33 type spindle for drill or collet chucks with integral collet, ASA and KH quick change and special spindles available as options
1 - 11 of 11 | Results Per Page | View | Unit of Measure
1 

Model #

Spindle Speed (no load)

Aluminum

Cast Iron

Mild Steel

Theoretical Spindle Torque

N/A 7300 min-1 at 60 Hz N/A 13/64 in5 mm N/A 1/16 in1.5 mm N/A 1/16 in1.5 mm N/A 0.72 ft.lbs
N/A 5400 min-1 at 60 Hz N/A 7/32 in5.5 mm N/A 5/64 in2 mm N/A 5/64 in2 mm N/A 0.97 ft.lbs
N/A 3600 min-1 at 60 Hz N/A 9/32 in7 mm N/A 9/64 in3.5 mm N/A 1/8 in3 mm N/A 1.46 ft.lbs
N/A 2400 min-1 at 60 Hz N/A 23/64 in8 mm N/A 13/64 in5 mm N/A 11/64 in4.5 mm N/A 2.19 ft.lbs
N/A 1700 min-1 at 60 Hz N/A 25/64 in10 mm N/A 15/64 in6 mm N/A 15/64 in6 mm N/A 3.09 ft.lbs
N/A 1400 min-1 at 60 Hz N/A 7/16 in11 mm N/A 5/16 in8 mm N/A 9/32 in7 mm N/A 2.81 ft.lbs
N/A 1000 min-1 at 60 Hz N/A 15/32 in12 mm N/A 23/64 in9 mm N/A 5/16 in8 mm N/A 3.94 ft.lbs
N/A 700 min-1 at 60 Hz N/A 35/64 in14 mm N/A 7/16 in11 mm N/A 23/64 in9 mm N/A 5.63 ft.lbs
N/A 550 min-1 at 60 Hz N/A 37/64 in14.5 mm N/A 1/2 in12.5 mm N/A 7/16 in11 mm N/A 7.16 ft.lbs
N/A 380 min-1 at 60 Hz N/A 19/32 in15 mm N/A 33/64 in13 mm N/A 7/16 in11 mm N/A 10.37 ft.lbs
N/A 250 min-1 at 60 Hz N/A 5/8 in16 mm N/A 17/64 in13.5 mm N/A 15/32 in12 mm N/A 15.75 ft.lbs
1 - 11 of 11 | Results Per Page | View | Unit of Measure
1