• 1/3 HP spindle motor
  • 1300-12,000 fixed rpm spindle speed range
  • Typical drilling capacity in mild steel is 1/4 in. (6.5 mm)
  • Typical drilling capacity in cast iron is 5/16 in. (8 mm)
  • Typical drilling capacity in aluminum is 23/64 in. (9 mm)
  • Standard stroke of 3.15 in. (80 mm)
  • Standard JT1 type spindle for drill or collet chucks with integral collet and special spindles available as options
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 

Model #

Spindle RPM (no load)

Aluminum Drill Size

Cast Iron Drill Size

Mild Steel Drill Size

Theoretical Spindle Torque

Thrust

Standard Stroke

GSA-2-3100U N/A 12000 N/A 7/64 in2.5 mm N/A 3/64 in1 mm N/A 3/64 in1 mm N/A 0.15 ft.lbs2.0 kg.cm N/A 256 lbs116 kg N/A 3.15 in80 mm
GSA-2-3065U N/A 10000 N/A 1/8 in3 mm N/A 3/64 in1 mm N/A 3/64 in1 mm N/A 0.17 ft.lbs2.4 kg.cm N/A 256 lbs116 kg N/A 3.15 in80 mm
GSA-2-3060U N/A 7200 N/A 5/32 in4 mm N/A 1/16 in1.5 mm N/A 1/16 in1.5 mm N/A 0.24 ft.lbs3.4 kg.cm N/A 256 lbs116 kg N/A 3.15 in80 mm
GSA-2-6045U N/A 5400 N/A 7/32 in5.5 mm N/A 5/64 in2 mm N/A 5/64 in2 mm N/A 0.32 ft.lbs4.5 kg.cm N/A 256 lbs116 kg N/A 3.15 in80 mm
GSA-2-6030U N/A 3600 N/A 1/4 in6.5 mm N/A 1/8 in3 mm N/A 1/8 in3 mm N/A 0.48 ft.lbs6.8 kg.cm N/A 256 lbs116 kg N/A 3.15 in80 mm
GSA-2-6020U N/A 2400 N/A 19/64 in7.5 mm N/A 11/64 in4.5 mm N/A 11/64 in4.5 mm N/A 0.72 ft.lbs10.1 kg.cm N/A 256 lbs116 kg N/A 3.15 in80 mm
GSA-2-6015U N/A 1800 N/A 5/16 in8 mm N/A 15/64 in4.5 mm N/A 15/64 in4.5 mm N/A 0.96 ft.lbs13.5 kg.cm N/A 256 lbs116 kg N/A 3.15 in80 mm
GSA-2-6010U N/A 1300 N/A 23/64 in9 mm N/A 5/16 in8 mm N/A 1/4 in6.5 mm N/A 1.33 ft.lbs18.7 kg.cm N/A 256 lbs116 kg N/A 3.15 in80 mm
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1