Drill heads which avoid interference with drill units jig fixtures or work pieces.
All multiple spindle heads have a gear ratio of 1:1.
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1 

Model #

Offset Pitch

Chucking Capacity

Chuck Type

P

D

L

N/A 1.7717 inches (45 mm) N/A 3/64 ∼ 25/64 inches (1.1 ∼ 10 mm) N/A Push in Type N/A 1.7717 inches (45 mm) N/A 4.17 inches (106 mm) N/A 7.16 inches (182 mm)
N/A 2.3622 inches (60 mm) N/A 3/64 ∼ 1/2 inches (1.1 ∼ 13 mm) N/A Push in Type N/A 2.3622 inches (60 mm) N/A 5.24 inches (133 mm) N/A 8.50 inches (216 mm)
N/A 2.3622 inches (60 mm) N/A 3/64 ∼ 1/2 inches (1.1 ∼ 13 mm) N/A Push in Type N/A 2.3622 inches (60 mm) N/A 5.24 inches (133 mm) N/A 8.50 inches (216 mm)
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1