Drill heads which avoid interference with drill units jig fixtures or work pieces.
All multiple spindle heads have a gear ratio of 1:1.
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1 

Model #

Offset Pitch

Chucking Capacity

Chuck Type

P

D

L

N/A 1.7717 inches (45 mm) N/A 3/64 ∼ 1/4 inches (1 ∼ 6.5 mm) N/A Drill Chuck N/A 1.7717 inches (45 mm) N/A 4.17 inches (106 mm) N/A 7.83 inches (199 mm)
N/A 2.3622 inches (60 mm) N/A 5/64 ∼ 1/2 inches (2 ∼ 12.7 mm) N/A Drill Chuck N/A 2.3622 inches (60 mm) N/A 5.24 inches (133 mm) N/A 10.23 inches (260 mm)
N/A 2.3622 inches (60 mm) N/A 5/64 ∼ 1/2 inches (2 ∼ 12.7 mm) N/A Drill Chuck N/A 2.3622 inches (60 mm) N/A 5.24 inches (133 mm) N/A 10.23 inches (260 mm)
N/A 3.0709 inches (78 mm) N/A 5/64 ∼ 1/2 inches (2 ∼ 12.7 mm) N/A Drill Chuck N/A 3.0709 inches (78 mm) N/A 6.85 inches (174 mm) N/A 11.07 inches (281 mm)
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1