Offset Drill Heads
Drill Heads
When there is limited accessibility to the work area, the offset head is an ideal accessory to the Selfeeder. It is attached directly onto the Selfeeder in place of the standard type drilling head. If the workpiece has an obtrusion or difficult contour the offset head can get into spots normally difficult or impossible for the standard drilling head. Drilling and countersinking operations can be done easily.
The drilling capacity of the offset drill head is in accordance with the capacity of selfeeder used.
The drilling capacity of the offset drill head is in accordance with the capacity of selfeeder used.
Model # |
Operating Air Pressure (psig) |
Offset Pitch (inches) |
Chuck Capacity (inches) |
Chuck Type |
Weight (lbs) |
---|---|---|---|---|---|
ODB-2075PU | Operating Air Pressure (psig) N/A 90 | Offset Pitch (inches) N/A 1.5354 | Chuck Capacity (inches) N/A 3/64 to 25/64 | Chuck Type N/A Erickson collet model 200 | Weight (lbs) N/A 1.6 |
ODB-065D | Operating Air Pressure (psig) N/A 90 | Offset Pitch (inches) N/A 1.5354 | Chuck Capacity (inches) N/A 1/32 to 1/4 | Chuck Type N/A Drill Chuck | Weight (lbs) N/A 1.6 |
ODC-50130PU | Operating Air Pressure (psig) N/A 90 | Offset Pitch (inches) N/A 1.8701 | Chuck Capacity (inches) N/A 5/32 to 9/16 | Chuck Type N/A Erickson collet model 100 | Weight (lbs) N/A 2.2 |
ODC-0130DU | Operating Air Pressure (psig) N/A 90 | Offset Pitch (inches) N/A 1.8701 | Chuck Capacity (inches) N/A 1/32 to 1/2 | Chuck Type N/A Drill Chuck | Weight (lbs) N/A 2.2 |