Tapping capacities are based on use of a spiral or point tap. The capacities are based on depth of tapping limited to 1.5 times the tap diameter.
Model # |
Erickson Collet Series |
Chucking Capacity (inches/mm) |
Type of Tap Holding |
B |
---|---|---|---|---|
1TC-100CU | N/A | N/A | N/A | N/A 4.78 inches (121.5 mm) |
1TC-100FU | N/A KTC | N/A #3 to 1/2 (M3 to M12) | N/A Floating #0.016 (0.4) | N/A 4.78 inches (121.5 mm) |
1TD-160FU | N/A KTC | N/A #3 to 5/8 (M3 to M16) | N/A Floating #0.016 (0.4) | N/A 5.12 inches (130 mm) |
1TD-22DFU | N/A LTC | N/A 1/2 to 7/8 (M12 to M22) | N/A Floating #0.016 (0.4) | N/A 5.12 inches (130 mm) |