Sugino Corp. - KH-A Spindle Nose - Compare Items

Sugino Corp.
1380 Hamilton Pkwy. Itasca, IL 60143
Toll Free: 888.SUGINO1/888.784.4661
Phone: 630.250.8585
Fax: 630.250.8665
Email: mach@suginocorp.com

Print Back

Spindle head dimensions follow recommended dimension by NT tool.
KH-A type spindle rosses utilies change stub holders by NT tool.
Maximam no load RPM for these spindle must not exceed 5000 RPM.
When selfeeder electric is installed whith horizontal or upward orientation, detach M 5x0.8 drain plug before use.
KH type spindle are not available on ES2 type Electric Selfeeder

Product Image - KH-A Spindle Nose

Unit of Measure

Items	KH-16A KH-A Spindle Nose	KH-22A KH-A Spindle Nose	KH-16A KH-A Spindle Nose	KH-22A KH-A Spindle Nose	KH-20A KH-A Spindle Nose
Applicable Selfeeder	N/A ES3C	N/A ES3P	N/A ES5	N/A ES5	N/A ES6
d	N/A 0.63 inches (16 mm)	N/A 0.87 inches (22 mm)	N/A 0.63 inches (16 mm)	N/A 0.87 inches (22 mm)	N/A 0.79 inches (20 mm)
d Tolerance.	N/A +0.0002 to +0.0006 inches ( +0.005 to +0.015 mm)
D	N/A 1.04 inches (26.4 mm)	N/A 1.28 inches (32.4 mm)	N/A 1.04 inches (25.4 mm)	N/A 1.28 inches (32.4 mm)	N/A 1.16 inches (29.4 mm)
D Tolerance	N/A - 0.0004 inches ( - 0.1 mm)
W	N/A 0.31 inches (8 mm)	N/A 0.39 inches (10 mm)	N/A 0.31 inches (8 mm)	N/A 0.39 inches (10 mm)	N/A 0.35 inches (9 mm)
W Tolerance	N/A +0.0031 to +0.0054 inches (+0.080 to +0.138 mm)
L1	N/A 1.69 inches (43 mm)	N/A 2.28 inches (58 mm)	N/A 1.69 inches (43 mm)	N/A 2.28 inches (58 mm)	N/A 1.89 inches (48 mm)
L3	N/A 1.08 inches (27.5 mm)	N/A 2.03 inches (51.5 mm)	N/A 1.18 inches (30 mm)	N/A 1.67 inches (42.5 mm)	N/A 1.18 inches (30 mm)
L4	N/A 1.77 inches (45 mm)	N/A 2.72 inches (69 mm)	N/A 1.87 inches (47.5 mm)	N/A 2.36 inches (60 mm)	N/A 1.87 inches (47.5 mm)
L5	N/A 3.21 inches (81.5 mm)	N/A 4.15 inches (105.5 mm)	N/A 3.92 inches (99.5 mm)	N/A 4.41 inches (112 mm)	N/A 4.11 inches (104.5 mm)