- Spindle head dimensions follow recommended dimension by NT tool.
- KH-A type spindle rosses utilies change stub holders by NT tool.
- Maximam no load RPM for these spindle must not exceed 5000 RPM.
- When selfeeder electric is installed whith horizontal or upward orientation, detach M 5x0.8 drain plug before use.
- KH type spindle are not available on ES2 type Electric Selfeeder
Unit of Measure
Specifications
Applicable Selfeeder |
N/A ES3C |
d |
N/A 0.63 inches (16 mm) |
d Tolerance. |
N/A
+0.0002 to +0.0006 inches ( +0.005 to +0.015 mm) |
D |
N/A 1.04 inches (26.4 mm) |
D Tolerance |
N/A
- 0.0004 inches ( - 0.1 mm) |
W |
N/A 0.31 inches (8 mm) |
W Tolerance |
N/A
+0.0031 to +0.0054 inches (+0.080 to +0.138 mm) |
L1 |
N/A 1.69 inches (43 mm) |
L3 |
N/A 1.08 inches (27.5 mm) |
L4 |
N/A 1.77 inches (45 mm) |
L5 |
N/A 3.21 inches (81.5 mm) |
