Sugino Corp.
Sugino Corp.
1380 Hamilton Pkwy. Itasca, IL 60143
Toll Free: 888.SUGINO1/888.784.4661
Phone: 630.250.8585
Fax: 630.250.8665
Email: mach@suginocorp.com
Print Back
Jet Clean Center™ Series

This CNC turret type cleaning and deburring machine is capable of jetting high pressure water of 50MPa (MAX) from a CNC positioned nozzle to the cross holes, deep holes and tap holes to totally remove chips and burrs. SLIM and WIDE machines are available depending on the installation space and workpiece size.
Unit of Measure

Specifications

Model

 N/A JCC-Wide

Max. Pressure

 N/A 50 MPa

Flow Rate (At 50MPa)

 N/A 18 L/min

Stroke (X Axis)

 N/A 650

Stroke (Y Axis)

 N/A 500

Stroke (Z Axis)

 N/A 500

Rapid Feed Speed (X, Y, Z Axes)

 N/A 48 m/min

Max. Main Spindle Speed

 N/A 1.000 min-1

Positioning Accuracy (Total Stroke)

 N/A 0.08 mm

Repeatability

 N/A ±0.05 mm

Max. Number of Tools

 N/A 6
Indexing Time1 N/A 0.5 sec

Width

 N/A 1500 mm

Length

 N/A 4275 mm

Height

 N/A 2640 mm

Machine Weight

 N/A 4000 kg

Controller

 N/A FANUC 0i-MD

Power Capacity

 N/A 45 kVA

Components

 N/A Bag Filter (Standard:1) Electric Control Panel Mist Collector Oil Skimmer Operation Panel Primary (Dirty) Tank Secondary (Clean) Tank Slide Door Sugino High Pressure Pump

Applicable Work for JCC-WIDE

 N/A Crankshaft
Cylinder Block
Cylinder Head
Stator Housing for EV
Transmission Parts jcc-wide.jpg

Machine Body

Machine Body Options

 N/A Air Blow Air Blow Unit Air Gun Area Sensor/Light Curtain Auto Loader Ceiling Auto Door Coolant Gun Exhaust Device Mist Collector (0.75 kW) Fixture and Clamp Device Full-Cover Inside Light Part Type Detector Revolving Light/Signal Light Slide Door Specified Paint Table 180º Turntable Table CNC Index Table (Single Station) Table Pallet Shuttle Table

Machine Body Standard

 N/A Auto Lube Device Exhaust Device Mist Collector (0.4 kW) Standard Cover

Washing Nozzle Options

 N/A Washing Nozzle Options and Deburring Tools - Direct Type Spray Nozzle
Direct Type Spray Nozzle, Direct Type Spray Nozzle
Washing Nozzle Options and Deburring Tools - Dual Rotating Nozzles
Dual Rotating Nozzles, Dual Rotating Nozzles
Washing Nozzle Options and Deburring Tools - Flat Type Spray Nozzle
Flat Type Spray Nozzle, Flat Type Spray Nozzle
Washing Nozzle Options and Deburring Tools - L Type Angle Nozzle
L Type Angle Nozzle, L Type Angle Nozzle
Washing Nozzle Options and Deburring Tools - Multi-Nozzle Manifold
Multi-Nozzle Manifold, Multi-Nozzle Manifold
Washing Nozzle Options and Deburring Tools - Offset Nozzle
Offset Nozzle, Offset Nozzle
Washing Nozzle Options and Deburring Tools - Rotating Lance Nozzle
Rotating Lance Nozzle, Rotating Lance Nozzle

Deburring Tools

 N/A Washing Nozzle Options and Deburring Tools - Brush
Brush, Brush
Washing Nozzle Options and Deburring Tools - Drill/Special Deburring Tool
Drill/Special Deburring Tool, Drill/Special Deburring Tool

Pump Station

Pump Station Options

 N/A Cyclone Filter Filter Pump (1.5 kW) LP Washing Pump (1.1 kW) Primary Filter (Drum Filter) Primary Filter (Magnet Separator) Primary Filter (Rotary Filter) Secondary Filter (Bag Filter) Washing Coolant Warming Heater

Pump Station Standard

 N/A 3-Way Cylinder Valve Filter Pump (0.55 kW) High Pressure Pump (35MPax29L) High Pressure Pump Pump (20MPax50L) High Pressure Pump Pump (50MPax18L) Liquid - Level Gauge Oil Skimmer Primary (Dirty) Tank (200 L) Primary Filter (Basket Filter) Secondary (Clean) Tank (550 L) Secondary Filter (Bag Filter)

Features

N/A High Accuracy Target Washing
With CNC control, 0.08 mm positioning contributes to highly accurate and efficient washing.

Total Removal of Any Chips and Burrs
We correspond to various workpieces by offering washing nozzle attachments such as L type nozzle and twin nozzle, and deburring tools.

Corresponding to Automatic Transfer Line
Best modular type washing machine suitable for gantry loader, conveyer, and robot transfer.

Plenty of Options
We offer suitable options for workpiece such as tables and filters.

Wider Washing Area
Same machine width as the JCC (conventional model) at 1,500 mm, yet provides X-axis stroke of 650 mm.

  • 1 Random Shortest Approach by CNC Control