Sugino Corp.
Sugino Corp.
1380 Hamilton Pkwy. Itasca, IL 60143
Toll Free: 888.SUGINO1/888.784.4661
Phone: 630.250.8585
Fax: 630.250.8665
Email: mach@suginocorp.com
Print Back
  • All air driven - powered with a durable high torque motor
  • High precision spindle construction
Unit of Measure

Specifications

Type

 N/A Portable Concentric Drilling Units

Air Motor Output

 N/A 0.4 kW0.54 hp

Aluminum Drill Size

 N/A 33/64 in13 mm

Titanium Drill Size

 N/A 23/64 in8 mm

CFRP Drill Size

 N/A 33/64 in13 mm

Spindle Speed (No Load)

 N/A 550~770

Ram Stroke

 N/A 3.15 in80 mm

Thrust

 N/A 880 N198 lbs

Chuck Type

 N/A JT1 Collect Holder ER-25

Weight

 N/A 6 kg13.2 lbs

Operating Air Pressure

 N/A 0.6 MPa87 psig

Operating Air Pressure Tolerance

 N/A +1/0 MPa

Air Consumption (Max. load)

 N/A 21.2 ft³/min0.6 m³/min

Air Consumption (No load)

 N/A 8.8 ft³/min0.25 m³/min

Chucking Capacity

 N/A 5/8 in16 mm

Note

 N/A

1. Maximum capacity drill size will depending on input operating air pressure. (Operating air pressure : 0.6MPa)
2. To achive the maximum power, it is necessary for the spindle to progress forward 10mm or more.
3. Nose piece and mist tank are option. Nose piece amd mist tank are not contain in the weight.
4. The drilling capacity shown above is for a depth equivalent to the frill diameter times two.
5. To select your model, refer to the workpiece configuration, material, cutting properties, diameter of the hole and rotation speed. (cutting speed)
6. The no load rotational speed is a range as shown above by the property of air motor.The spindle speed decreaces by the situation of the drilling load.
7. Ti* : Titanium, Al* : Alminum, CFRP* : Carbon Fiber Reinforced Plastic