Sugino Corp.
Sugino Corp.
1380 Hamilton Pkwy. Itasca, IL 60143
Toll Free: 888.SUGINO1/888.784.4661
Phone: 630.250.8585
Fax: 630.250.8665
Email: mach@suginocorp.com
Print Back
  • High powered drilling unit available drilling f16mm titanium
  • Original "Stroke Free program" for laminated materials amounted
    • The program which automatically switch cutting conditions for different material
    • No need to set stroke for each materials
Unit of Measure

Specifications

Type

 N/A Portable Concentric Drilling Units

Aluminum Drill Size

 N/A 25/32 in20 mm

Titanium Drill Size

 N/A 5/8 in16 mm

CFRP Drill Size

 N/A 25/32 in20 mm

Spindle Speed (No Load)

 N/A 92~920

Ram Stroke

 N/A 4.72 in120 mm

Thrust

 N/A 4300 N967 lbs

Chuck Type

 N/A JT6 Collect holder ER-20

Weight

 N/A 11 kg26 lbs

Chucking Capacity

 N/A 25/32 in20 mm

Spindle Motor

 N/A 0.9 kW DC Brushless Motor 1.2hp

Feed Motor

 N/A 0.4kW AC servo motor 0.54hp

Maximum Rapid Approach Speed

 N/A 83 mm/sec3.27 in/sec

Max. Cutting Speed

 N/A 16.7 mm/sec0.66 in/sec

Note

 N/A

1. To select your model, refer to the workpiece configuration, material, cutting properties, diameter of the hole and rotation speed. (cutting speed)
2. The drilling capacity shown above is for a depth equivalent to the drill diameter times two.
3. The power voltage of the main spindle inverter is a 3-phase 200V AC±10%, 50/60Hz.
4. Ti* : Titanium, Al* : Alminum, CFRP* : Carbon Fiber Reinforced Plastic
5. Nose piece and cable are not contain in the weight.