Sugino Corp.
Sugino Corp.
1380 Hamilton Pkwy. Itasca, IL 60143
Toll Free: 888.SUGINO1/888.784.4661
Phone: 630.250.8585
Fax: 630.250.8665
Email: mach@suginocorp.com
Print Back
  • Compact and flexible mounting directions
  • Available to use without electricity
Unit of Measure

Specifications

Type

 N/A Pneumatic

Drill Chuck Capacity

 N/A 1/2 in12.7 mm

Aluminum Drill Size (ADC) - 1 Spindle

 N/A 3/8 in9.5 mm

Cast Iron Drill Size (FC200) - 1 Spindle

 N/A 5/16 in7.9 mm

Carbon Steel Drill Size (S45C) - 1 Spindle

 N/A 15/64 in6.0 mm

Aluminum (ADC) - 2 Spindles

 N/A 15/64 in6.0 mm

Cast Iron Drill Size (FC200) - 2 Spindles

 N/A 3/16 in4.8 mm

Carbon Steel Drill Size (S45C) - 2 Spindles

 N/A 5/32 in4.0 mm

Thrust

 N/A 180

Weight

 N/A 20.7 lbs9.4 kg

Operating Air Pressure

 N/A 90 psig

Air Consumption (No load)

 N/A 24 ft³/min

Air Consumption (Max. load)

 N/A 27 ft³/min

Ram Stroke

 N/A 3.94 in100 mm

Spindle Speed (No Load)

 N/A 3400

Note

 N/A

Note:
1. Tapping values in the upper roe of tapping capasity are for when spiral tap or point tap is used, and the values in the lower row are for when hand tap No.2 is used. Tapping depth is 1.5 times of tapping diameter.
2. Rotating speed of cutting feed is decided bt the workpiece material, machinability, tap diameter, and tapping speed etc.
3. Select adequate feed geard for the pitch of the tap to be used.
4. Fast approach feed rate and cutting feed rate will differ depending on thread pitch and spindle speed. Please contact your neaest sales office for more information.
5. Maximum weight of the attachment is 40kg for both hotizontal and vertical use.
6. When mounting the unit upward, waterproof cover is required in order to protect the unit from cutting oil and chips. Please contact your nearest sales office for more information.
7. AL*: Aluminum, ST*: Steel