Sugino Corp.
Sugino Corp.
1380 Hamilton Pkwy. Itasca, IL 60143
Toll Free: 888.SUGINO1/888.784.4661
Phone: 630.250.8585
Fax: 630.250.8665
Email: mach@suginocorp.com
Print Back
  • Available spindle options
    • Integral collet spindle:ER11, ER20
    • Quick change ASA and KH spindle types
  • Spindle and body air purge
  • Capable of peck feed drilling
  • Long stroke version is available
Unit of Measure

Specifications

Type

 N/A Air Feed/Electric Rotation

Motor Output

 N/A 2.0hp

Aluminum Drill Size

 N/A 23/64 in9 mm

Cast Iron Drill Size

 N/A 13/64 in5 mm

Mild Steel Drill Size

 N/A 11/64 in4.5 mm

Thrust

 N/A 337 lbs1500 N

Spindle Taper

 N/A JT1

Weight

 N/A 31kg 68lbs

Operating Air Pressure

 N/A 72 psi

Air Consumption

 N/A 0.211 to 0.353

Theoretical Spindle Torque

 N/A 1,500 ~ 3,000 RPM(Rated Torque): 3.53 ft.lbs (4.78 N·m)
Over 3,000~3,600RPM(Rated Power)

Drill Chuck Capacity

 N/A 33/64 in13 mm

Note

 N/A

1. The selection of models should be based on the shape of the work, material, cutting characteristics, diameter and material of tools, rotational speed (cutting speed), etc.
2. The drilling capacity displayed in the above table is based on values representing a drilling depth of twice the diameter of the drill.
3. The standard attachment for the Hydro Speed Regulator is RB-3140.
Please specify an optional Hydro Speed Regulator if required.
(Optional Hydro Speed Regulator Models: RB-3160, R-3182A, R-31132A)
4. Make sure to use a collet chuck or spindle nose when the hardness of carbide drills and tool shanks is higher than that of general HSS (high-speed steel) drills.
5. Valveless specification is standard. If you require valve block specification (former standard specification), please order valve block ass'y separately.
(Replacement to be made by customer)

Spindle RPM range

 N/A 1,500~3,600