Sugino Corp.
Sugino Corp.
1380 Hamilton Pkwy. Itasca, IL 60143
Toll Free: 888.SUGINO1/888.784.4661
Phone: 630.250.8585
Fax: 630.250.8665
Email: mach@suginocorp.com
Print Back
  • Programmable feeds with fixed RPM
  • Through tool coolant available
  • 300 mm long stroke
Unit of Measure

Specifications

Type

 N/A Servo Driven Mechanical Feed

Chuck Type

 N/A ER40

Chucking Capacity

 N/A 25/64 ~ 1-1/32 in10 ~ 26 mm

Aluminum Drill Size (ADC)

 N/A 15/32 in12 mm

Cast Iron Drill Size (FC200)

 N/A 15/64 in6 mm

Carbon Steel Drill Size (S45C)

 N/A 15/64 6 mm

Maximum Stroke

 N/A 300 mm11.81 in

Spindle Motor

 N/A 2.2 kW Induction motor 2.95HP

Feed Motor

 N/A 2.7 kW AC Servo motor 3.62HP

Thrust

 N/A 1124 lbs5000 N

Maximum Rapid Approach Speed

 N/A 300 mm/sec

Max. Cutting Speed

 N/A 16.7 mm/sec

Weight

 N/A 507 lbs230 kg

Note

 N/A

1. To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed)
2. The drilling capacity shown above is for a depth equivalent to the drill diameter times two.
3. The power voltage of the feed controller and main spindle inverter is a 3-phase 200V AC±10%, 50/60Hz.
4. Holding brake is attached to the feed motor.
5. Coolant center-through is used for SSM5 as standard specification. Please direct if you do not need it.
6. AL…Aluminium, FC…Cast Iron, ST…Steel

Spindle Speed (No Load)

 N/A 3000