Sugino Corp.
Sugino Corp.
1380 Hamilton Pkwy. Itasca, IL 60143
Toll Free: 888.SUGINO1/888.784.4661
Phone: 630.250.8585
Fax: 630.250.8665
Email: mach@suginocorp.com
Print Back
  • Available spindle option: ER11MS, ER16
  • Non-feeding spindle
Unit of Measure

Specifications

Type

 N/A Varimotor Spindle

Chuck Type

 N/A ER16 (Collet Chuck)

Chucking Capacity

 N/A 1/64 ~ 25/64 in0.5 ~ 10.0 mm

Aluminum Drill Size (ADC)

 N/A 11/32 in8.5 mm

Cast Iron Drill Size (FC200)

 N/A 19/64 in7.5 mm

Carbon Steel Drill Size (S45C)

 N/A 1/4 in6.5 mm

Spindle Speed (No Load)

 N/A 390 ~ 3900

Spindle Motor

 N/A 0.9 kW1.2 hp

Weight

 N/A 9 lbs4 kg

Note

 N/A
  • To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed)
  • The drilling capacity shown above is for a depth equivalent to the drill diameter times two.
  • The power voltage is a 3-phase 200V AC±10%, 50/60Hz.
  • For cooling the motor in inside, please input clean dry air into air-inlet.
  • Please take care for not closing the air-outlet for motor cooling by clamp fixture etc. Also please set the air-outlet certainly becomes downward.
  • The leading direction of cable is different from the type of Varimotor. If you need more detailed information, please ask your nearest sales offices. 7. AL…Aluminium, FC…Cast Iron, ST…Steel