Sugino Corp.
Sugino Corp.
1380 Hamilton Pkwy. Itasca, IL 60143
Toll Free: 888.SUGINO1/888.784.4661
Phone: 630.250.8585
Fax: 630.250.8665
Email: mach@suginocorp.com
Print Back
  • Powerful unit with capacity to tap up to 1 inch (M27) in Aluminum
  • Powerful unit with capacity to tap up to 3/4 inches (M20) in Steel
  • Save up to 99 programs
  • Improve cycle time with second origin
Unit of Measure

Specifications

Type

 N/A Servo Motor

Spindle Speed (No Load)

 N/A 550

Aluminum Tap Size (ADC) - 1 Spindle (in)

 N/A 3/4

Aluminum Tap Size (ADC) - 1 Spindle (mm)

 N/A M22

Aluminum Tap Size (ADC) - 2 Spindle (in)

 N/A 9/16

Aluminum Tap Size (ADC) - 2 Spindles (mm)

 N/A M16

Carbon Steel Tap Size (S45C) - 1 Spindle (in)

 N/A 4/7

Carbon Steel Tap Size (S45C) - 1 Spindle (mm)

 N/A M16

Carbon Steel Tap Size (S45C) - 2 Spindles (in)

 N/A 3/8

Carbon Steel Tap Size (S45C) - 2 Spindles (mm)

 N/A M10

Fast Approach Stroke

 N/A 4.72 in120 mm

Motor Output

 N/A 4.4hp AC Servo Motor 3.3 kW

Weight

 N/A 137 lbs62 kg

Note

 N/A

1. Tapping capacities are for three flute #2 hand taps and 80% thread. Refer to the Synchrotapper catalog when using spiral flute or spiral point taps (for through-hole tapping). Contact a Sugino representative when using roll form, pipe taps, etc.
2. Tapping capacities are limited to 1.5 times the tap diameter.
3. The maximum allowable weight of multi-spindle heads to be attached to Synchro-Tappers is as follows: Horizontal working direction: 136 lbs. (62 kg), Vertical up working direction: 88 lbs. (40 kg), Vertical down working direction: 88 lbs. (40 kg)
4. When mounted spindle up, protect the unit against coolant and debris with customer-supplied guarding.
5. When ordering provide the unit model number, spindle rpm, primary input voltage (220 or 440 volts), tap size and thread pitch, and spindle type.