Sugino Corp.
Sugino Corp.
1380 Hamilton Pkwy. Itasca, IL 60143
Toll Free: 888.SUGINO1/888.784.4661
Phone: 630.250.8585
Fax: 630.250.8665
Email: mach@suginocorp.com
Print Back
    Sugino recommends the use of proximity sensor Operating Signal Kits (OSK) to control Electric Selfeeder working positions and to provide the signals necessary for sequencing them with other operations and equipment in semi-automated or fully automated environments. These OSK's mount easily to the Selfeeder and have a cable-to-sensor quick connect feature for ease of placement.
    Proximity sensors are entirely solid state electronic controls which provide rapid response and high switching rates. They contain no moving parts, require no physical contact for actuation, and have no cams or linkage. They are completely encapsulated, making them impervious to most liquids, chemicals, cutting oils and coolants, high temperature variations, and vibrations.
    Order a single sensor OSK to detect home position (return position) only, or a two sensor kit to detect both home and maximum drill depth positions.

Operating Signal Kits

Unit of Measure

Specifications

Applicable Unit

 N/A ES2
ES3CL
SSE2
SSE3
SSE3C

Signal

 N/A Electrical signal

Detection

 N/A Maximum drilling depth & home position

Sensing Distance

 N/A 0.059 inches (1.5 mm)

Operating Voltage (VDC)

 N/A 10 - 30

Cable Length

 N/A 16.4 inches (5 m)

No. of Wire

 N/A 3

No. of LED

 N/A 2

Sensor Type

 N/A NPN PNP

Stroke Range

 N/A 80

Selfeeder Type

 N/A Electric

Function

 N/A pneumatic signal for any point on reverse motion

Sensor/Switch

 N/A Proximity Sensor