Sugino Corp.
Sugino Corp.
1380 Hamilton Pkwy. Itasca, IL 60143
Toll Free: 888.SUGINO1/888.784.4661
Phone: 630.250.8585
Fax: 630.250.8665
Email: mach@suginocorp.com
Print Back
  • Spindle head dimensions follow recommended dimension by NT tool.
  • KH-A type spindle rosses utilies change stub holders by NT tool.
  • Maximam no load RPM for these spindle must not exceed 5000 RPM.
  • When selfeeder electric is installed whith horizontal or upward orientation, detach M 5x0.8 drain plug before use.
  • KH type spindle are not available on ES2 type Electric Selfeeder
Product Image - KH-A Spindle Nose
Unit of Measure
1 

Model #

Applicable Selfeeder

d

D

W

L1

KH-16A N/A ES3C N/A 0.63 inches (16 mm) N/A 1.04 inches (26.4 mm) N/A 0.31 inches (8 mm) N/A 1.69 inches (43 mm)
KH-22A N/A ES3P N/A 0.87 inches (22 mm) N/A 1.28 inches (32.4 mm) N/A 0.39 inches (10 mm) N/A 2.28 inches (58 mm)
KH-16A N/A ES5 N/A 0.63 inches (16 mm) N/A 1.04 inches (25.4 mm) N/A 0.31 inches (8 mm) N/A 1.69 inches (43 mm)
KH-22A N/A ES5 N/A 0.87 inches (22 mm) N/A 1.28 inches (32.4 mm) N/A 0.39 inches (10 mm) N/A 2.28 inches (58 mm)
KH-20A N/A ES6 N/A 0.79 inches (20 mm) N/A 1.16 inches (29.4 mm) N/A 0.35 inches (9 mm) N/A 1.89 inches (48 mm)
KH-28A N/A ES6 N/A 1.10 inches (28 mm) N/A 1.59 inches (40.4 mm) N/A 0.39 inches (10 mm) N/A 2.68 inches (68 mm)
KH-28A N/A ES7 N/A 1.10 inches (28 mm) N/A 1.59 inches (40.4 mm) N/A 0.39 inches (10 mm) N/A 2.68 inches (68 mm)
KH-32A N/A ES7 N/A 1.26 inches (32 mm) N/A 1.72 inches (43.8 mm) N/A 0.39 inches (10 mm) N/A 3.27 inches (83 mm)
Unit of Measure
1