Sugino Corp. - Cat's Eye S Surface

Diamond tip type burnishing tool, CAT'S EYE can be applied to hard materials up to H_RC 60. Throw-away tip enables quick and easy replacement.

Request Information

Unit of Measure

Items	CEO-4D1R-S25 Cat's Eye S Surface	CEO-4D1L-S25 Cat's Eye S Surface	CEF-4D1R-S25 Cat's Eye S Surface	CEF-4D1L-S25 Cat's Eye S Surface
Processing Section	N/A Outer Surface	N/A Outer Surface	N/A End Surface	N/A End Surface
Shank Diameter (in)	N/A Ø0.984
Shank (mm²)	N/A 16 20
Handed Direction	N/A Right Handed	N/A Left Handed	N/A Right Handed	N/A Left Handed
Work Piece Material	N/A	N/A Suj2(H_RC60	N/A	N/A
Work Piece Inner Diameter (in)	N/A	N/A 0.512	N/A	N/A
Surface Roughness (Ry µ inch)	N/A Before burnishing ~ 4.0 (Rz), ~ 157 (Ry)	N/A After burnishing 15.74 Ry, 0.4 Rz Before burnishing 15.48 Ry, 4.0 Rz	N/A Before burnishing ~ 4.0 (Rz), ~ 157 (Ry)	N/A
Work Piece Hardness (H_RC)	N/A 45	N/A	N/A 60	N/A
Peripheral Velocity (ft/min)	N/A 165~650	N/A 325	N/A 165~650	N/A
Feed (in/rev)	N/A 0.002	N/A 0.001	N/A 0.002	N/A
Spring Load (lbs)	N/A 9	N/A 200	N/A 45	N/A
Tip Type and Number	N/A DT4D1