Sugino Corp. - Superoll SH Series

These roller-burnishing tools are used for ID processing and allow precision adjustments to 0.0025 mm.
The SH series for processing through holes.

Request Information Search by Specification

Unit of Measure

Items	SH450 Superoll SH Series	SH475 Superoll SH Series	SH500 Superoll SH Series	SH525 Superoll SH Series	SH550 Superoll SH Series
Type	N/A Standard Type
Hole Type	N/A Through Hole
Diameter - A (Adjustment)	N/A 0.176 ∼ 0.188 inches (4.45 ∼ 4.80 mm)	N/A 0.186 ∼ 0.198 inches (4.70 ∼ 5.05 mm)	N/A 0.195 ∼ 0.208 inches (4.95 ∼ 5.30 mm)	N/A 0.205 ∼ 0.218 inches (5.20 ∼ 5.55 mm)	N/A 0.215 ∼ 0.228 inches (5.45 ∼ 5.80 mm)
Maximum Processing Depth (H)	N/A 1.968 inches (50 mm)
Tool Length (L) - Straight	N/A 4.528 inches (115 mm)
Tool Length (L) - Morse Taper	N/A 4.646 inches (118 mm)
Tool Length (L)	N/A
Housing No.	N/A HA1
Housing Diameter (D)	N/A 1.102 inches (28 mm)
Roller Part No.	N/A R001	N/A R001	N/A R002	N/A R002	N/A R003
No. of Roller	N/A 4
Mandrel Part No.	N/A M001	N/A M002	N/A M002	N/A M003	N/A M002
Stem Part No.	N/A
Shank Part No. (Straight)	N/A S01R (0.492 inches Dia. x 1.378 inches) S01R050 (1/2 inches Dia. x 1.378 inches)
Shank Part No. (Morse Taper)	N/A S01 (Morse Taper No.1)