Jet Clean Center™ Series

This CNC turret type cleaning and deburring machine is capable of jetting high pressure water of 50MPa (MAX) from a CNC positioned nozzle to the cross holes, deep holes and tap holes to totally remove chips and burrs. SLIM and WIDE machines are available depending on the installation space and workpiece size.
Unit of Measure
Items
CNC Turret Type High Pressure Cleaning and Deburring Machines - JCC-W6650

Jet Clean Center-Wide

CNC Turret Type High Pressure Cleaning and Deburring Machines - JCC-S6450

Jet Clean Center-Slim
Model N/A JCC-Wide N/A JCC-Slim
Max. Pressure N/A 50 MPa
Flow Rate (At 50MPa) N/A 18 L/min
Stroke (X Axis) N/A 650 N/A 460
Stroke (Y Axis) N/A 500 N/A 460
Stroke (Z Axis) N/A 500
Rapid Feed Speed (X, Y, Z Axes) N/A 48 m/min
Max. Main Spindle Speed N/A 1.000 min-1
Positioning Accuracy (Total Stroke) N/A 0.08 mm
Repeatability N/A ±0.05 mm
Max. Number of Tools N/A 6
Indexing Time1 N/A 0.5 sec
Width N/A 1500 mm N/A 1000 mm
Length N/A 4275 mm N/A 4660 mm
Height N/A 2640 mm N/A 2600 mm
Machine Weight N/A 4000 kg N/A 3000 kg
Controller N/A FANUC 0i-MD
Power Capacity N/A 45 kVA
Components N/A Bag Filter (Standard:1) Electric Control Panel Mist Collector Oil Skimmer Operation Panel Primary (Dirty) Tank Secondary (Clean) Tank Slide Door Sugino High Pressure Pump
Applicable Work for JCC-WIDE N/A Crankshaft
Cylinder Block
Cylinder Head
Stator Housing for EV
Transmission Parts jcc-wide.jpg
N/A jcc-wide.jpg
Applicable Work for JCC-SLIM N/A jcc-slim.jpg N/A ABS Housing
Brake Calipers
EPump Body
Valve Body jcc-slim.jpg
Machine Body Options N/A Air Blow Air Blow Unit Air Gun Area Sensor/Light Curtain Auto Loader Ceiling Auto Door Coolant Gun Exhaust Device Mist Collector (0.75 kW) Fixture and Clamp Device Full-Cover Inside Light Part Type Detector Revolving Light/Signal Light Slide Door Specified Paint Table 180º Turntable Table CNC Index Table (Single Station) Table Pallet Shuttle Table
Machine Body Standard N/A Auto Lube Device Exhaust Device Mist Collector (0.4 kW) Standard Cover
Pump Station Options N/A Cyclone Filter Filter Pump (1.5 kW) LP Washing Pump (1.1 kW) Primary Filter (Drum Filter) Primary Filter (Magnet Separator) Primary Filter (Rotary Filter) Secondary Filter (Bag Filter) Washing Coolant Warming Heater
Pump Station Standard N/A 3-Way Cylinder Valve Filter Pump (0.55 kW) High Pressure Pump (35MPax29L) High Pressure Pump Pump (20MPax50L) High Pressure Pump Pump (50MPax18L) Liquid - Level Gauge Oil Skimmer Primary (Dirty) Tank (200 L) Primary Filter (Basket Filter) Secondary (Clean) Tank (550 L) Secondary Filter (Bag Filter)
Washing Nozzle Options N/A , Direct Type Spray Nozzle
, Dual Rotating Nozzles
, Flat Type Spray Nozzle
, L Type Angle Nozzle
, Multi-Nozzle Manifold
, Offset Nozzle
, Rotating Lance Nozzle
Deburring Tools N/A , Brush
, Drill/Special Deburring Tool
Features N/A High Accuracy Target Washing
With CNC control, 0.08 mm positioning contributes to highly accurate and efficient washing.

Total Removal of Any Chips and Burrs
We correspond to various workpieces by offering washing nozzle attachments such as L type nozzle and twin nozzle, and deburring tools.

Corresponding to Automatic Transfer Line
Best modular type washing machine suitable for gantry loader, conveyer, and robot transfer.

Plenty of Options
We offer suitable options for workpiece such as tables and filters.

Wider Washing Area
Same machine width as the JCC (conventional model) at 1,500 mm, yet provides X-axis stroke of 650 mm.
N/A High Accuracy Target Washing
With CNC control, 0.08 mm positioning contributes to highly accurate and efficient washing.

Total Removal of Any Chips and Burrs
We correspond to various workpieces by offering washing nozzle attachments such as L type nozzle and twin nozzle, and deburring tools.

Corresponding to Automatic Transfer Line
Best modular type washing machine suitable for gantry loader, conveyer, and robot transfer.

Plenty of Options
We offer suitable options for workpiece such as tables and filters.

Wider Washing Area
Even with the machine width at 1,000 mm, it will handle the same part size as the conventional model.
  • 1 Random Shortest Approach by CNC Control