Drill heads which avoid interference with drill units jig fixtures or work pieces.
All multiple spindle heads have a gear ratio of 1:1.
Unit of Measure

Specifications

Offset Pitch

N/A 1.7717 inches (45 mm)

Chucking Capacity

N/A 3/64 ∼ 25/64 inches (1.1 ∼ 10 mm)

Chuck Type

N/A Push in Type

P

N/A 1.7717 inches (45 mm)

D

N/A 4.17 inches (106 mm)

L

N/A 7.16 inches (182 mm)

L1

N/A 2.32 inches (59 mm)

L2

N/A 3.86 inches (98 mm)

L3

N/A 0.98 inches (25 mm)

A

N/A 0.87 inches (22 mm)

B

N/A 0.89 inches (22.5 mm)

C

N/A 1.30 inches (33 mm)

H

N/A 0.39 inches (10 mm)

J

N/A 0.79 inches (20 mm)

K

N/A 1.61 inches (41 mm)

M

N/A 1.02 inches (26 mm)

Q

N/A 1.61 inches (41 mm)

R

N/A 1.54 inches (39 mm)

Machining Specification

N/A Drilling Reaming Tapping

Depth

N/A Blind Through

Coolant

N/A Dry Oil Base Water Base

Working Direction of Spindle

N/A Horizontal Stand Up Stant Down Vertical Down Vertical Up

Type of Spindle

N/A ASA Collet

Type of Multi Spindle Head

N/A Catch Clip Type Fixed Spindle Type

Requested Drilling and Tapping Unit

N/A Selfeeder Synchotapper